Folger Tech Kossel 2020 RepRap Full 3D Printer Kit with Auto Level REV B

Folger Tech Kossel 2020 RepRap Full 3D Printer Kit with Auto Level REV B
Folger Tech Kossel 2020 RepRap Full 3D Printer Kit with Auto Level REV B
Folger Tech Kossel 2020 RepRap Full 3D Printer Kit with Auto Level REV B
Folger Tech Kossel 2020 RepRap Full 3D Printer Kit with Auto Level REV B

Folger Tech Kossel 2020 RepRap Full 3D Printer Kit with Auto Level REV B

Folger Tech Kossel 2020 3D Printer (Full Kit) REV B Assembly required. Customer feedback we do make small alterations to the kit if we feel they improve the kits performance and stability, the kit you. Some of these slight changes and improvements.

If you are looking for a fun and exciting 3D printer to build that requires a bit more technical skill than our i3 kit this delta printer might be just what you are looking for. This delta style printer is constructed using 2020 extruded aluminum rails making it strong as well as aesthetically pleasing. This printer also comes with an auto level servo that will set a relative bed level without you making the physical adjustments to the bed. All in all this is a great kit and worth the time required for this slightly more demanding setup.

This kit includes the following. Complete Set of Black Printed Plastic Parts Needed. Pre-Cut 2020 Aluminum Beam (x3-700mm x9-300mm).

Aluminum Heated Bed (3mm x 210mm). X3 End Stop Circuits w/ LED Incl.

Carbon Fiber Rods (Need to Be Cut to Length). Direct Drive Extruder w/ Injection Molded Part (For 1.75mm ABS/PLA) MK9 TYPE. X1 All-Metal Hot End for 1.75mm Filament. All Required Nuts/Bolts for Assembly. 360W 12V 30A Power supply. X4 NEMA 17 Stepper Motors. 5 Meters of GT2 Timing Belt. X1 RAMPS 1.4 Controller. X1 Arduino Mega 2560 R3 Clone.

X5 A4988 Stepper Drivers (1 Extra). X1 Roll 8mm Kapton Tape. X1 Inductive Sensor with resistors. 210mm Print Area x 310mm.

Can print ABS or PLA 1.75mm. Can run 110V or 220V (Only Comes With US cord). Please note the items included inside the below link are often updated to include new and updated information so please bookmark it for your records. Stl files to print replacement plastics.

2004 LCD Controller w/ SD Card Reader Print Without a Computer! : 2004 LCD w/ SD Card Reader.

Filament ABS/PLA: 1.75 ABS & PLA Filament (Various Colors). His is a kit of components for assembly into a 3D Printer by the end user. Building and using the printer is potentially very dangerous as it involves electricity and high temperatures. Building the printer will require a certain amount of physical dexterity, common sense and a thorough understanding of what you are doing. We have provided fully comprehensive build documentation to enable you to build your Folger Techl 3D Printer Kit in a safe manner.

Read all of the manual to enable you to make an informed decision. Building and operating involves electricity, so all necessary precautions should be taken and adhered to, the printer runs on 12V supplied by a certified power supply, so you shouldn't ever have to get involved with anything over 12V but bear in mind there can still be high currents involved and even at 12V they shouldn't be taken lightly. We wouldn't recommend leaving your printer running un attended, or at least until you are confident to do so.

We cannot be held responsible for any loss, damage, threat, hurt or other negligent result from either building or using the printer. The item "Folger Tech Kossel 2020 RepRap Full 3D Printer Kit with Auto Level REV B" is in sale since Thursday, November 27, 2014.

This item is in the category "Computers/Tablets & Networking\3D Printers & Supplies\3D Printers". The seller is "folgertech" and is located in Nashua, New Hampshire. This item can be shipped worldwide.


Folger Tech Kossel 2020 RepRap Full 3D Printer Kit with Auto Level REV B


Home    Archives    Contact Us    Privacy Policy Agreement    Terms of service