For this purpose, the device processes commercially available plastic filaments by means of the FFF principle (Fused Filament Fabrication) or also referred to as FDM (Fused Deposition Modeling). The hardware and software of the 3D printer is suitable for accelerated printing (Acceleration), which speeds up more than 180 mm / sec. With this, 1.75mm plastic filaments can be used e.Heated aluminum platform with temperature control, coated with Kapton SuperWideTape. LCD display with key interface (operation without computer). Muted fan noise by installing Silent fans (approximately 50-55 dB, which is roughly equivalent to normal conversation / room volume). Electronics based on MakerBot Mightyboard. Print without a computer from SD-Card! ToolsKit with all tools needed for maintenance. Generously dimensioned, heatable construction platform (230x150mm). Some technical specifications of the 3D printer. Interface: Print via USB or print from SD card.
Device dimensions: 470 x 430 x 380 mm (L x W x H). Based on the proven MakerBot Mightyboard Electronics technology. Heated construction platform up to max.Extruder temperature up to max. Temperature sensor for accurate temperature measurement (extruder and platform). Works with 110V and 230V power supply. Production accuracy in the XY plane: approx. The software + driver necessary for printing. The item "Large 3D Printer FDM Dual Extruder MK8 -Stable and precise PLA/ABS PLA/ABS" is in sale since Friday, July 19, 2019. This item is in the category "Computers/Tablets & Networking\3D Printers & Supplies\3D Printers". The seller is "manufacturer88" and is located in Alhambra, California. This item can be shipped to United States.