Free database of print-ready 3D models. Printing at 100 micrometer XY resolution and up to 20 micrometer Z layer thickness, SparkMaker has an amazing ability to print in higher resolution compared to DLP 3D printers.
However, an affordable price doesn't mean we compromised on the quality. The 98 x 55 x 125 print area means that SparkMaker is ideal for scale prototyping as well as general 3D printing. With SparkMaker, we wanted to make 3D printing as easy and user friendly as possible.Unlike other SLA 3D printers that require a computer connection, SparkMaker supports offline printing. You can forget about connection problems. Simply insert an SD card with a pre-loaded design, press the print button and your creation begins to take shape.
Monitoring your print projects is easier too with SparkMaker. It has a jumbo LED light with three different colors to indicate the printing progress.Of course, quality is what we strive for when it comes to our 3D printing endeavors. While the majority of today's FDM printers will produce a decent model, compare an FDM print to one produced by any SLA 3D printer and you'll quickly see that SLA takes the lead when it comes to the overall quality of finish.
Start to Create in 3 Steps. Download a 3D print model file from your computer to an SD card. Insert SD card into SparkMaker & fill printer with the desired resin. Press the button and your design begins to print.How to use SparkMaker 3D Printer. Step 1: Add model to SparkStudio to add support and slice. Step 2: Save the slice file to SD card. Step 3: Level platform when first print (No need to level again next time). Step 4: Loosen the four screws on both sides of the platform. Step 5: Rotate the knob drops the platform to the lowest point. Step 6: Press down the platform and tighten the four screws on both sides of the platform.
Step 7: Pour the resin into resin tank(Less than 120g resin). Step 8: Insert the SD card into the slot (Face down). Step 9: Press the button and start to print. Step 10: The print is finished.
Step 11: Loosen the handle and remove the platform. Step 12: Remove the supports of model.
Step 13: Clean the model with 99% alcohol. Step 14: Irradiate the model with UV-light about 2-3 mins.
Step 15: Finally, get the model. 1 x Sparkmaker SLA 3D Printer (the resin do not included). Please update your latest address when you check out.Your satisfaction is our goal. Thank you for giving us the chance to serve you. We're striving to provide the most attentive service to our customers. If by any chance, there is a problem with your order, our professional after sales team will help you sort it out as soon as they could (usually you'll receive reply within 24 hours and 48 hours on weekends). We look forward to be able to serve you again.
The item "SparkMaker SLA 3D Printer UV Resin Light-Curing DIY Desktop Affordable Off-line" is in sale since Thursday, November 1, 2018. This item is in the category "Computers/Tablets & Networking\3D Printers & Supplies\3D Printers". The seller is "anson8203010" and is located in CA. This item can be shipped to United States.
Printing Height: 125mm